[fsstnotch]

Blykins,
Given the specs of the heads, 1.7 roller rockers, what cam would you recommend? Think 1.6 rockers would be a better option?

the cam specs on the howard that I have in the list are:
Lift: .474"/.498" Duration @ .050": 214/224 Lobe separation: 112

the specs on the victor Jr's
2.05/1.60 valves 60cc chambers 210cc intake runners 75cc exhaust max lift .650

Looking for hydraulic, non roller cam, 1500-6500 range

I would also consider different heads... Victor Jr's are my preference, but they are most likely overkill for me right now. My intentions are to put a blower on the car. but most likely not until the first engine is ready for a rebuild. Buying the Jr's now would save me money later i think.