Thread: Turn signal not illuminating brighter?
View Single Post
  #5 (permalink)  
Old 08-13-2007, 10:11 AM
wtm442's Avatar
wtm442 wtm442 is offline
Beam Me Up Scottie
Visit my Photo Gallery

 
Join Date: Aug 2004
Location: Squantum (part of Quincy), MA
Cobra Make, Engine: SPF1049 Titanium w/black stripes, 351W with Trick Flow Heads, Tremec 3550
Posts: 7,592
Send a message via MSN to wtm442
Not Ranked     
Default
Quote:
Originally Posted by BDR530
It is a dual filament bulb but both filaments look good. I'll check the ground tonight.
"Looking good" is not a test of functionality. Hold the base of the bulb securely and tap the bulb and see if either filaments "wiggle". Or swap the bulb to the other side and see what happens. If the bulb is OK on the other side, it could be the bad ground as CHANMADD mentioned. Also check for corrosion on the spring loaded terminals in the socket.
__________________
Warren
'Liberals are maggots upon the life of this planet and need to get off at the next rotation.' (Jamo 2008)
Reply With Quote