[Excaliber]

There was a rumor a couple of years ago that yet another group had purchased the rights to produce Excaliburs as KIT cars only. Typical 'roller' type deal like BDR or SPF thing. I'm not sure what became of that enterprise, or how closely any 'new' Excals would be parts wise to the old ones.

Never the less, the Excals were built with commonly available Ford and typical after market type parts, like Wilwood brakes and such. Finding out exactly WHICH part number you need to ask for at NAPA is the challenge.

Don Scott, owner of Classis Roadsters II would be one good source for parts as many many things interchange. In fact I recall he recently offered for sale a complete exhaust system specifically for an Excal, cat converters and the whole ball of wax (no doubt sold by now). CR II headers fit nicely, for instance. Mustang II style front suspension. When I needed some new front springs I literally bought them for a V6 powered Mustang II. If I recall they were a tad to high and I had to cut a coil or two off them...