[Tommy]

Bermblaster -
I tried to read this entire thread before posting, but I may have missed something. Here's my question. What specific fuel pressure regulator do you have and how do you know the outputs are run to the correct things? For example, one particular Holley regulator has two outputs, one for the carburetor and one for the return line. If the fuel pressure gauge were plumbed on the return line side it wouldn't show the pressure on the line going to the carburetor. Likewise, if the carburetor and return lines were reversed, the carburetor would get fuel intermittantly. Can you confirm the plumbing for the regulator is correct?