Not Ranked
That's the sme RPM steel crank everybody - including me - gets. We take the extra effort to straighten and regrind them so that they are round and straight.
The prices they have are nothing special - they specify that they require balancing for an extra $200 - apparently they are unaware that every one of these will require two slugs of mallory to balance internal at 50-75 bucks a slug. At the end of the day you'll be spending the same money as one of mine - or Keith's - or Tom's - or Doug's kits and be getting non-branded rods.
This is not the place for a commercial - and I apologize in advance for that - but I and the others can all do a .030 over 390/445 stroker kit with Scat and Probe components fully balanced for under 2 grand.
__________________
Survival Motorsports
"I can do that....."
Engine Masters Challenge Entries
91 octane - single 4bbl - mufflers
2008 - 429 cid FE HR - 675HP
2007 - 429 cid FE MR - 659HP
2006 - 434 cid FE MR - 678HP
2005 - 505 cid FE MR - 752HP
Last edited by Barry_R; 11-24-2007 at 11:07 AM..
|