Not Ranked
I have another shot of the transmission mount modified for the Tremec TKO. I had to cut about 1.5" off the forward section of the mount and relocate the holes back close to the tube. That allowed it to clear the 5th gear buldge that the toploader doesn't have. Let me know if you need a dimension to the pinion. Hopefully someone with a later model kit can tell us what changed over time!
Yes the slots for the radius rods are still there, I am going to fill in part of it and do a half round for under the car exhaust pipe to tuck into. I built the dolly for the frame rather than the body, I move the motorcycles out and slide the frame out the side when I am working on it :-). If your garage is too big, that's money you could have put into the cars!
|