[65cobra1]

Well, JBo, the safety wires are on pretty tight. I went out to put a small kink in them and no dice. They look good, tho. A nice clean job.

The real deal was the fact that I was able to get the wheels off (After a year plus, clean them up and get fresh anti-seize on all threads and mating surfaces.

I also realized that I had originally whacked them on too tight. So, when I re-installed, I just whacked the spinners until they stopped moving and left out the last big hit.

I'll watch them this summer and see how all that turns out. Should be OK since I'm a cruiser not a tracker.

Thanks for all the tips...Good stuff!
Ivan