G'day guys,
I purchased an SVO 351R Block a while back that was Drysumper originally and you drilled and converted to a standard Oiler,the block is one of the 9.200 Deck blocks and the Bores are virgin having not been machined as yet...My Question to you is
.....Seeing that I would Ideally like a 427 stroker is this possible or even advisable with this block,should I be looking at dropping back the cubes to say a 408/410......having already purchased the block ,I have Twisted Wedge R Heads and a Morrison 8 x48mm Crosss Ram setup......Plans are for a weekend Racer/come regular cruiser...seriously contemplating sending it back your way to get it done !!! I await the wisdom of KC.
Regards Pauls
Ps.. Pics of Injection in my Gallery with Heads and Block sitting underneath..Cheers
__________________
They shall not grow old as we who are left grow old. Age shall not weary them, nor the years condemn. At the going down of the sun and in the morning, We will remember them ....
And in the end, it's not the years in your life that count. It's the life in your years- Abraham Lincoln
