Quote:
Originally Posted by cleandan
Please, any information from you guys will help. I see 78 reads of this thread but there is only one reply???
I did do a few different searches on this subject here and cam up with no matches at all. Something I was a bit suprised by. That is why I made this post. I gotta believe sombody has some idea about the general ballpark costs of K-Code 289 HI-PO parts on this forum....anyone, anyone, Bueller, Bueller? Thanks again for any and all help.
|
YOUR 289 HIPO IS WORTH ALOT . I WOULD USE EBAY TO SELL THIS WITH A GOOD PRICE , 289 HP BLOCK IS WORTH 2000T0 $5000.00 . THIS DEPENDS ON BORE AND CONDITION. IF ITS STANDARD BORE YOU WILL GET MORE IF IT IS 60 OVERBORE 2K IS STANDARD PRICE BUT SOME MAT PAY MORE. THE CRANK AND RODS VARY THE RODS ARE VERY EXPENSIVE USUALLY 500 TO 900. THE CRANK IS NOT THAT SPECIAL 289 CRANKS AND 289 HP CRANKS ARE THE SAME . IF YOURS HAS ORIGINAL MARKINGS WHERE THE BRINNEL TEST WAS DONE IT MIGHT BE WORTH A LITTLE MORE, BUT THIS CAN BE REMADE SO MANY FAKES ARE OUT THERE, THE HEADS ARE 300 TO 800 A PIECE , ONCE AGAIN THE CONDITION IS EVERYTHING, , CLEAN ALL OF IT , CLEARLY TAKE PICS OF ALL NUMBERS REPAINT TO LOOK NICE AND LET E BAY SELL FOR YOU. I HAVE SOLD A FEW HIPO PARTS AND I HAVE SOLD ALL OF IT IN LESS THAN A DAY OR TWO. GOOD LUCK , BOB