[Danr55]

Thanks for all the creative ideas guys.. especially my good friend Broberg.. or as they say in Japan, Blobelg..

The rear end is all the way down with the pinion drive shafts out and the bearings changed. I need to know about shim stack up for the output shafts and how to shim the output shafts when they are reinstalled into the diff... I've found a Jag manual in texas of all places and I'm going to bring that home with me and see if I can get what I need from that. I was just curious if we had anyone in the group who was familiar with Salsbury differentials who could help me put it back together..