Not Ranked
The stubstack raises the overal height of the carb inlet inside the air filter by 3/4 of an inch. K&N indicates that you must have a minimum of 1 1/2" clearance above the top of the stubstack.
I have the Edelbrock ProFlow 1000 air filter which breathes thru the top, not the sides, so it works out very well and the 1 1/2 is a non issue.
Ed
__________________
LIFE IS TOO SHORT TO WORRY ABOUT GOOD GAS MILEAGE
________
Utinam logica falsa tuam philosophiam totam suffodiant!
________
Last edited by CobraEd; 10-22-2001 at 07:59 AM..
|