Thread: Comp cams??
View Single Post
  #2 (permalink)  
Old 10-22-2001, 08:30 AM
CHRIS POTTER CHRIS POTTER is offline
Senior Club Cobra Member
Visit my Photo Gallery

 
Join Date: Sep 1999
Location: SHERRILLS FORD, NC
Cobra Make, Engine: Lone Star, 351-c
Posts: 269
Not Ranked     
Default

Lee, I have a 351-c with 4bbl heads. I used a Lunati bracketmaster ll cam, which is a little more radical than what you are looking at. My compression ratio is 10.25 to 1, i have a performer intake, Holley 750 vac secondaries. It idles nicely at 750 rpm, sounds gtreat, and is very driveable. the mileage is around 15 mpg, which is good, I think for a car with 3.55 gears. The 2bbl heads you have will actually work better than my 4bbl heads for street, but, I have port plates on intake and exhaust, so it works fine. I wouldn't change a think on me car. It runs fine on 92/93 octane, with about 34 degrees total advance on an msd distributer. If you have any further questions, feel free to email me. Chris
__________________
CHRIS POTTER
Reply With Quote