[gjkrv8]

Hi everyone.

I am after some opinions and advice on an external fuel swirl pot etc.

My tank is a custom aluminium job that doesnt have baffles and has an external fuel pump - very noisy Bosch job.

I have a bit of a problem with fuel starvation when the tank is getting down to about half full and you go up a hill or accellerate hardish.

I reckon I need a low pressure pump and swirl pot prior to my high pressure pump.

I have seen a couple of posts on this, just wanted to get the latest advice.

Also any good sources/recommednations for where to get one (also made) and suggestions for low pressure pump (and a quieter high pressure one)?

Thanks

Rgds

Gregg