[shelby racer]

I just want to start this post off by saying that it is in no way meant to be a bash on SAI. I have gotten fantastic (beyond expectations) customer service and support from the new SAI. Now for the problem.
My car has about 400 miles on it and the upright / spindle is coming apart. The fasteners (which are behind the rotor and can therefore only be adjusted by taking the rotor off) are backing out (not just loose). Unfortunately, the only way to get the rotor off is to take the whole assembly off and press it off (per SAI). Not only is this going to be kind of expensive to do, but if I need to do a brake job in the future and replace or cut the rotor, I will have to do it again. The options that I see are:
1) suck it up and live with it
2) hope that SAI may come up with a solution before I have to do a brake job or deal with this again
3) replace the entire front suspension with one from another vendor like Kirkham
4) park it and hope for a better solution (or save some money to deal with it) in the future since I lost my job a month and a half ago - which is what I am planning on doing for now.
I can not believe that I am the first one who has ever had to deal with this problem so I am hoping there is another solutuion that I am unaware of. All input is welcome. Thanks.
John(;-)