Not Ranked
Given the option I would glue the cover to the heads - sealing both the intake to head interface as well as the valve cover flange itself. Then I would use studs to mount the covers so I could service them without disturbing the gasket.
__________________
Survival Motorsports
"I can do that....."
Engine Masters Challenge Entries
91 octane - single 4bbl - mufflers
2008 - 429 cid FE HR - 675HP
2007 - 429 cid FE MR - 659HP
2006 - 434 cid FE MR - 678HP
2005 - 505 cid FE MR - 752HP
|