Not Ranked
Yep - there is an issue. The stud sticks up far enough - sometimes - to hit the Erson rocker stand. Quickest fix is to mark the contact with a light install (no pushrods) and tap - and then mill (or grind) a clearance dimple/divot into the rocker stand. Takes only a few minutes and wont hurt a thing.
__________________
Survival Motorsports
"I can do that....."
Engine Masters Challenge Entries
91 octane - single 4bbl - mufflers
2008 - 429 cid FE HR - 675HP
2007 - 429 cid FE MR - 659HP
2006 - 434 cid FE MR - 678HP
2005 - 505 cid FE MR - 752HP
|