The pictures Blas has are from my car SPF#1004. I replaced every piece of linkage from the pedal to the carburetor with stainless steel. Everything came from
www.mcmaster.com (Mcmaster-Carr)... stainless rod, flat bar to make the bell cranks, and the heim joints (Ball Joint Rod Ends on Page 1168), for the rod ends and to replace the two on the firewall holding the transverse rod in place. I had to have someone else TIG the bell cranks to the rods but otherwise all hand made and polished. I'll try to post pictures. I planned to start making them for other owners next winter but I had to delay my retirement for a year.