[Grubby]

My Cobra has a 351W with Edelbrock heads, Performer cam and intake with Demon carb. It runs really good and was dyno tuned by the previous owner. I think it is a speed demon with vac secondaries.

During hard braking the rpm drops and stalls. I suspected fuel sloshing from the rear bowl and flooding the engine, so I connected both bowl vents with a piece of fuel line. No change.

I have set the float level from bottom of the sight glass to 3/4 with no apparent change.

The car runs fantastic in all rpm ranges. The only issue is stalling.

Any suggestions?

John