Thread: Turn Signal Assembly Removal
View Single Post
  #14 (permalink)  
Old 10-18-2009, 06:27 AM
RICK LAKE RICK LAKE is offline
CC Member
Visit my Photo Gallery

 
Join Date: Mar 2001
Location: E BRUNSWICK N.J. USA,
Posts: 3,841
Not Ranked     
Lightbulb Mine downed down about 3" to work on
PatrickT Pat I removed all the screws in the dash and the 2 bolts in the upper sterring column and dropped the whole thing about 3" to get to the amp gauge and remove it. I have 2 small 2/4's holding the assemblies up. Tilt the dask a little forward, it should be no problem. Just be carefull to not pinch the wires when reinstalled the dash. Ps small hands make it alot easier than bear paws
Reply With Quote