Riverstone Crusie In - July 17th

svobud · #1 (**permalink**) 07-10-2004, 01:59 PM

Anyone up for it? I figured getting there between 4pm-5pm. If you guys want - we can meet up at the QT on sixes road.

Dont worry Matt - I'll swing by the house so you can get a Kitchen Pass.

Tony Radford · #2 (**permalink**) 07-10-2004, 02:05 PM

I may be up for it. I'm getting ready to head over to the USA Classic Diner cruise in - Lilburn. The ride's too clean to leave in the garage.

Ed Gollob · #3 (**permalink**) 07-10-2004, 07:32 PM

Riverstone cruise sounds OK but we need to meet at the QT at 4PM or it gets too busy to park very many cars together.

Ed

Tony Radford · #4 (**permalink**) 07-11-2004, 06:30 AM

I ran into several local Cobra guys at the cruise in last night and invited them all to the Riverstone event. We'll see. We haven't had a good crowd together in quite a while. "LET'S DO IT", he exclaimed while gazing across a cloudless sky!

svobud · #5 (**permalink**) 07-11-2004, 02:04 PM

ok - Sixes Rd, which is exit 11 on I-575. Turn right (if you were heading North on 575) and head down to the QT. Meet there at 4pm. Don't be late - we ain't hanging out there long.

If you miss us, the Riverstone Cruise in is located at the Riverstone Mall - exit 20 on I-575 ... turn left, Mall is approx 1/2 mi down on the right. It's free and parking is open to anyone in a Hot Rod.

DavidH · #6 (**permalink**) 07-11-2004, 07:22 PM

Hey why not meet at the Hooters there at the Riverstone Exit. Instead of making a left to go to the car show. Make a right and less than 1/2 mile on the right is Hooters. Have lunch about 3:00 and leave for the show at 4:00 to get some good parking. Maybe a good photo opportunity...

Tony Radford · #7 (**permalink**) 07-12-2004, 02:10 PM

Weather's looking good so far for Saturday. Any of you Lawrenceville and Lilburn guys up for a caravan to Canton? Chill, you up for it? I'll take the usual scenic route up RT 20 through Buford and Cumming up to I 575 to the show. Some of you closet weenies need to get out and exercise those ponies!

Incidentally, I did a hard shift into third at a little over 80 MPH Saturday and the back wheels started spinning. Is that normal?

Base626 · #8 (**permalink**) 07-12-2004, 02:58 PM

Was that on I-85 going down the exit ramp?????
I thought I smelled rubber or thought your car was just comming apart as I was accelerating up to you???

mzhun · #9 (**permalink**) 07-12-2004, 05:18 PM

I'll be in France cheering Lance Armstrong on to his 6th Tour win and reminding those commie bed wetting liberals why they don't speak German.

Tony Radford · #10 (**permalink**) 07-12-2004, 05:56 PM

That was it. The entrance ramp must be particularly slick. I could feel it break loose when I hit 3rd. The last time I hit I85 from Indian Trail, I accelerated fairly quickly, jumped into the fast lane and saw Gwinnett County in my rear view mirror. He just cruised past me in the HOV lane, but I still skipped a couple of heartbeats. You going to Riverside Saturday?

Base626 · #11 (**permalink**) 07-13-2004, 05:33 AM

Yes I am planning on attending. I will also probably set something up for the 24th at Dandy Donuts. I am looking forward to meeting some more cobra folks.

Anyone have the number for the Johnex cobra that goes by Just a 6

DavidH,
I am in for meeting you at the Hooters at 3:00 any other takers????

kajun · #12 (**permalink**) 07-13-2004, 05:54 AM

If my cobra is out of the shop in time, I'll be there.

southernfriedcj · #13 (**permalink**) 07-13-2004, 07:26 PM

Hey guys, if there are any '69 Firebird convertibles, '65-'66 Fastback Mustangs(4 spd only), Challenger T/A's, or any Superbirds for sale there, please get me the phone #.

Thanks,

Jim

tommyc · #14 (**permalink**) 07-15-2004, 01:46 PM

I'm coming over across RTE 140, so I'll try to find you guys there - but don't stone me for leaving the Cobra home and bringing a TVR. Just got it and it needs a little exercise.

Base626 · #15 (**permalink**) 07-15-2004, 02:13 PM

TommyC,
Awhile back in either 5.0 or MM&FF ther was a guy with a bad a$$ yellow mustang he lived in Adairsville. It was a 90 ish coupe with a new forced induction 04 cobra engine. Do you know of it? Do you know how to get ahold of him? Do you know if he is going to Riverstone?

tommyc · #16 (**permalink**) 07-15-2004, 02:22 PM

Maybe........there's a fellow in town (Orlando Wilson - if you've ever been into bass fishing, you know who Orlando is) whose son has evidently built some pretty awesome Mustangs, at least one of which was in a magazine. So that's probably who it is. Orlando's home phone is unlisted and I'm not sure the son even lives with him, but Orlando's office is just down the street, so I can get his business number without too much effort.

Tony Radford · #17 (**permalink**) 07-15-2004, 05:35 PM

Hey, where are all you Atlanta slugs? Are we going to get some serious attendance or what?

hcollado · #18 (**permalink**) 07-15-2004, 06:55 PM

Tony, I am trying to get a hall pass for Saturday. I'll let you know and we can meet on 20 somewhere.

kajun · #19 (**permalink**) 07-16-2004, 05:55 AM

Tony,

Looks like the cobra going to be in the shop till middle of next week. The rack and pinion is totaly fried and we couldn't find anything polished localy so I order one. This really sucks!!! Im going to try and come anyway but getting a kitchin pass without the cobra will be tuff. Hope to see everyone sat.

Kajun

Cracker · #20 (**permalink**) 07-16-2004, 06:15 AM

I'm in!

TC - come steal the show and promote re-cylcing with that aluminum car of yours!!!

It's about time you show your face at one of our gatherings. Besides, this seems more your speed - sitting still - your car that is!