In need of two casted bumperettes (solid)

john007black · #1 (**permalink**) 10-27-2009, 07:51 PM

Hello to all I am in search of two chrome plated bumperettes for a Cobra. They are solid (casted not stamped stainless) with the normal two taped holes in the rear of them 1/2-20 threads . Any and all info would be great. Thank you

Paul F · #2 (**permalink**) 10-27-2009, 08:21 PM

http://www.finishlineaccessories.com...products_id=84

Click on 'bumpers' on the left side of the frame to see the pictures.

HI Cobra · #3 (**permalink**) 10-27-2009, 11:44 PM

Make sure those are 1/2" and not 3/8" holes before you order. CR uses
the 1/2" and I am guessing Contemporary does too but most everything
else out there uses 3/8" rods for the bumpers.

kgs365 · #4 (**permalink**) 10-28-2009, 11:05 AM

does anyone make a nice set in aluminum instead of the crome?

tcrist · #5 (**permalink**) 10-28-2009, 12:24 PM

Make sure of the bolt spacing also. A few (like Classic roadsters) are different.

Terry

aurora cobra · #6 (**permalink**) 10-28-2009, 12:24 PM

Found two casted overrides in excellent condition. Wish I could figure out how to post photos. jim jamcatsnyder@roadrunner.com send me your email address

Paul F · #7 (**permalink**) 10-28-2009, 06:58 PM

Quote:

Originally Posted by kgs365

does anyone make a nice set in aluminum instead of the crome?

B&B supplies (or at least did when I bought) their roadster with the cast aluminum bumper. Give Bryan a call.

Paul F · #8 (**permalink**) 10-28-2009, 07:01 PM

Quote:

Originally Posted by aurora cobra

Found two casted overrides in excellent condition. Wish I could figure out how to post photos. jim jamcatsnyder@roadrunner.com send me your email address

The way I do it is drop my pictures into Photobucket and copy the link here. Go to photobucket.com. Open an account. Upload your pictures. Grab the IMG... below the picture and copy it in your post. This method seems to work on most forums.

john007black · #9 (**permalink**) 10-29-2009, 06:55 PM

The threaded holes are 1/2 inch

john007black · #10 (**permalink**) 10-29-2009, 07:03 PM

I am in the middle of building this Contemporary Cobra, I got this car as a unfinished project. It only came with two of these casted bumperettes. That is why I need two more. I am updating the frame with more support. I have built a back bone for the frame along with a new billet aluminum cantelever front suspension.