Classic Roadster build

badvnom · #1 (**permalink**) 10-12-2012, 05:43 PM

Need recommendations for someone to finish the drivetrain installation on my Classic Roadsters kit. I have the engine but I need someone to bring it to running roller stage. It's currently sitting in Detroit, so looking for someone between Detroit and Charlotte NC. I actually live in Roanoke, but will consider that area fair game. Preferably someone who's actually built at Classic Roadsters kit before. Paint and interior are covered. The suspension is completed, rear differential installed, body is fitted but not mounted. Would like to discuss.

StreetSnake · #2 (**permalink**) 10-12-2012, 06:54 PM

Contact Jeff. He has built numerous classic roadsters as well as other brands. He also has some inventory of classic roadster parts in case you are short anything. His email is jeff@celinacustomauto.com. He is based in Ohio.

BBQCYCLEWERKES · #3 (**permalink**) 10-13-2012, 06:00 AM

May want to contact Ed Combs, known at Double Venom on this forum. He has built many Classic Roadsters and can most likely help you. He also lives in Penwater Michigan which isn't very far from you. Good luck with your build.

tcrist · #4 (**permalink**) 10-13-2012, 08:23 AM

I dont think that is going to happen. He as asked for help before with the stipulation not to recomend DV.

Classic Roadster build

BADVNOM,

Sorry that you have had so many problems with this build. If I were in your area I would help you, but!!!!!!!!!!!.

StreetSnake · #5 (**permalink**) 10-13-2012, 09:41 AM

Jeff at Celina custom auto is currently building two I believe. One of his own, with a 4.6 Terminator and another. He just shipped one out to Chicago. It will be able to help or point you in the right direction. He built my first shelby and did an excellent job.