Clear bra patterns

[BAsque1]

Nope, it is still looking fine
LOu

[blown871]

A local here for $300 will apply http://suntektrucut.com/Film.aspx

They did print for me (as they are a vendor) the picture that shows the pre cut pieces... looks nice and will set appt. to do it.

[blown871]

Suntek TruCut

[GBowman]

I just looked at my car at Vintage and could hardly see it on a black car-it was somewhat visible on my silver car but a non issue. We put it on the top of the doors too in case you or your passenger where a watch

No orange peel at all.

[STEVE-O]

Has anyone ever tried one of the spray on protectors ( 3M product? ) ? Wondering if something like that would be good for a longer ride when more chips may occur and then peel it off when done.

[WildBill1965]

My under standing you need to cover anything that you don't want that stuff on as it goes everywhere like over spray. Never used it just what a friend had passed on in a discussion on the spray!

B i l l

[Moriarty]

For going around the top snaps, is it okay to remove and replace them, or will that cause damage?

[Alfa02]

@Moriarty, look's like your new here? I don't have a answer on removing the snap's as my car hasn't got to that stage, but I would work around them, any time you remove anything from Filberglas and reinstall it seems to liken the chance of leaving chip's and the hole becoming bigger. If your looking for NW friend's to hang with, we just had a meet-up at the NW Historics Races last Sat. Please PM, myself or anyone though our NW club forum. We look forward to new member's. We'll show you the secret handshake Cheers Tom.

[Varmit]

I also use it on my windshield. There is no distortion, it perfectly fine at night, and windshield wipers have no effect on on the coating. I totally protects the windshield