shoulder belt bezel location ,Superformace

[kennyhbh]

Hi , Can some tell me where the best placement of the shoulder belt bezels should be. Drivers and passengers side, pics would be great.

[Mark IV]

The bezel location will be dictated by the slot in the bulkhead that the belts pass through. Look from the boot forward to see the slot that is in the bulkhead above the crossmember for the belts, open that slot and your question is answered.

[Blas]

First of all, you may or may not have the hole drilled in the crossmember for adding shoulder harnesses - That depends on your chassis number. I have a write-up whith photos on how to install the shoulder harnesses. Send me your email address offline and I'll send you a copy. You will most likely need to remove your rear wheels to access the bolts unles you have a lift and have long (LONG) arms.

[Hammer65]

I probably have the same information in the form of a Superformance Technial Bulletin. Email me for the detaile. I had my installer use this and have a cople of pointers to share.