Side Exhaust Sound?

[talos]

Currently I have steel side exhausts on my cobra with the auger type muffler with no issues. I am going to have new exhausts built out of stainless. Are the auger mufflers the loudest acceptable with little restriction or is there any other type mufflers to look at?

[mikeinatlanta]

I'm running 4" sidepipes with no mufflers. Sound level and restriction level are perfect for me.

[GregAgrest]

Take a look at Classic Chambers Exhaust. He has a couple videos and sound clips on the site. I ended up going with them and like em. Good sound and loud, just like a Cobra should sound

[talos]

Originally Posted by mikeinatlanta

I'm running 4" sidepipes with no mufflers. Sound level and restriction level are perfect for me.

You run them on the street this way?

[talos]

Originally Posted by GregAgrest

Take a look at Classic Chambers Exhaust. He has a couple videos and sound clips on the site. I ended up going with them and like em. Good sound and loud, just like a Cobra should sound

I'll check them out Greg. Thanks

[RET_COP]

I run 3" cobra packs from Classic Chambered Exhaust. They are louvered inside but the louvers are small compared to the old exhaust I had. I have no idea what was on there. I measured the ID before I welded them up and If I remember right they measured just under 3" ID. Night and day compared to the last set I had although those were 2 1/2 and not a true 2 1/2. I don't believe I have much restriction at all. I had to re-jet my carb ^^. Compared to auger I can't give you a caparison, RareIron has that information.

[undy]

I gained 75 rwhp switching from Auger to Classic chamber with no other modifications. Engine size/HP will greatly affect the benefit.

[Dwight]

Classic Chambered Exhaust!

[joyridin']

Classic Chambered Exhaust Inc. - FAQ