PP bolt tq

RET_COP · #1 (**permalink**) 03-16-2016, 04:47 AM

First go with an aluminum flywheel. Any recommendations on torque specs for 3/8 pp bolts, is it reduced for aluminum and should I loctite.

vector1 · #2 (**permalink**) 03-16-2016, 10:18 AM

I just put one together, recommendation was 33# for 3/8, 22# for 5/16, mine was metric and looked like 5/16 so be careful. Used the 22# and blue loctite with flat washer. This was a Ram aluminum flywheel, their website might have instructions also.

RET_COP · #3 (**permalink**) 03-16-2016, 01:14 PM

Thanks Vector1, I spoke to McLeod Tech they said the same 33ft.lbs. Blue