FE ONLY OR 514ci. CRATE IN YOUR,....COBRA ?

[FUNFER2]

Originally Posted by blykins

Yes, a Torker/Torker II is actually one of the shortest intake manifolds for a BBF. Carb pad average height is 3-7/8". Pretty short. Next up is a Performer RPM, average height is ~5-1/2". Victor is 6-1/2". I'm using "average" height because the intakes are actually angled (except for the Victor) and the front of the carb pad is much lower than the front.

Hey Brent, originally, we used a the Edelbrock RPM manifold, then after the rebuild we got the Air Gap and it hit my hood.
So, I had to plane down the carb surface about 3/8". The Lone Star is a great car, but that and we can utilize a turkey pan pissed me off.

Anyway, even the air gap barley,...hit's the hood, just a small rub. Do you think we should stay with it or a different manifold if I build a 427 or 428 ?

[FUNFER2]

Great news. I sold the 1/4 scale RC Sprint Car ! Woo-Woo !

Now I can put that find towards the foundation,.... of my engine, the block !