Main Menu
|
Nevada Classics
|
Advertise at CC
|
S |
M |
T |
W |
T |
F |
S |
1 |
2 |
3 |
4 |
5 |
6 |
7 |
8 |
9 |
10 |
11 |
12 |
13 |
14 |
15 |
16 |
17 |
18 |
19 |
20 |
21 |
22 |
23 |
24 |
25 |
26 |
27 |
28 |
29 |
30 |
31 |
|
|
|
|
|
CC Advertisers
|
|
39Likes
11-27-2022, 05:37 PM
|
Senior Club Cobra Member
|
|
|
Join Date: Jul 1999
Location: SF Bay Area,
CA
Cobra Make, Engine: SPF #1019
Posts: 1,657
|
|
Not Ranked
I had a similar symptom, which was solved by removing the strainer/sock on the fuel pick up. We diagnosed the problem, by working backwards on the fuel system. When the engine died the carb bowls were empty.
|
11-27-2022, 08:21 PM
|
CC Member
|
|
|
Join Date: Aug 2007
Location: Carlsbad,
Ca
Cobra Make, Engine: SPF 2932 with 438 Lykins Motorsports engine. Previous owner of FFR 5452.
Posts: 2,616
|
|
Not Ranked
Is this a new problem that just started? Has the car been running fine up until lately? When the engine quits after running for a while, can you see fuel in the sight glass of the float bowls? If not, it’s a fuel delivery or vapor lock problem. Try a phenolic spacer under the carb to isolate some of the heat from the engine. If there’s fuel in the bowls and it won’t start, then it’s a heat related electrical problem. Most likely the coil or MSD box.
__________________
Jim
|
11-27-2022, 09:23 PM
|
|
CC Member
|
|
|
Join Date: Nov 2009
Location: Edmond,
Ok
Cobra Make, Engine: Classic Roadsters
Posts: 628
|
|
Not Ranked
You have the TFI module on the distributor you can check with freeze spray when the problem occurs. It’s an easy fix if it’s bad, I kinda thought someone had checked it already.
The PIP sensor takes pulling the distributor and a dist gear remover/install tool.
There was a class action lawsuit on the TFI module it’s the first thing you check if you have one.
Is this motor old and have maybe points or a Pertronix ignition? If so nevermind…
__________________
Chaney Shores Studio
Last edited by sunman; 11-27-2022 at 10:47 PM..
|
11-28-2022, 12:49 AM
|
|
CC Member
|
|
|
Join Date: Feb 2013
Location: Carlsbad,
Ca
Cobra Make, Engine: SAI FIA, 289HP (5-bolt), 48IDA Webers
Posts: 1,244
|
|
Not Ranked
We still have no idea what kind of ignition you are using.
|
11-28-2022, 11:19 AM
|
CC Member
|
|
|
Join Date: Jul 2009
Cobra Make, Engine:
Posts: 416
|
|
Not Ranked
...time for a break...
|
11-29-2022, 06:58 PM
|
CC Member
|
|
|
Join Date: Oct 2021
Location: Woodland Hills,
Ca
Cobra Make, Engine: Aurora GRX
Posts: 104
|
|
Not Ranked
Quote:
Originally Posted by jhv48
Is this a new problem that just started? Has the car been running fine up until lately? When the engine quits after running for a while, can you see fuel in the sight glass of the float bowls? If not, it’s a fuel delivery or vapor lock problem. Try a phenolic spacer under the carb to isolate some of the heat from the engine. If there’s fuel in the bowls and it won’t start, then it’s a heat related electrical problem. Most likely the coil or MSD box.
|
thx have the spacer already. Checkin the coil next and distributor!
thx alot
|
11-30-2022, 05:18 AM
|
|
CC Member
|
|
|
Join Date: Feb 2021
Cobra Make, Engine: ford 302
Posts: 290
|
|
Not Ranked
how old are the fuel lines. Ethanol can cause them to fail internally causing fuel starvation as well.
|
11-30-2022, 08:26 PM
|
CC Member
|
|
|
Join Date: Oct 2021
Location: Woodland Hills,
Ca
Cobra Make, Engine: Aurora GRX
Posts: 104
|
|
Not Ranked
Quote:
Originally Posted by Sycraft
how old are the fuel lines. Ethanol can cause them to fail internally causing fuel starvation as well.
|
3 weeks ago Galpin just replaced.
thx a lot
|
11-30-2022, 09:32 PM
|
|
CC Member
|
|
|
Join Date: Feb 2013
Location: Carlsbad,
Ca
Cobra Make, Engine: SAI FIA, 289HP (5-bolt), 48IDA Webers
Posts: 1,244
|
|
Not Ranked
Last time I’ll bring it up, what kind of ignition are you running?
|
12-02-2022, 11:18 AM
|
|
CC Member
|
|
|
Join Date: Mar 2006
Location: San Marcos california,
CA
Cobra Make, Engine: 1989 KCC from South Africa Right Hand Drive
Posts: 1,601
|
|
Not Ranked
OK this sounds like a problem I had on my Yacht The fuel tank needs a proper breather....That's it. Attach a tip-over valve.
|
12-02-2022, 05:27 PM
|
CC Member
|
|
|
Join Date: Apr 2022
Cobra Make, Engine:
Posts: 2
|
|
Not Ranked
Coil mount
Is your ignition coil mounted on the motor itself or on the inner fender or firewall?
If it’s on the motor it may well be heat soaking
|
12-03-2022, 01:01 PM
|
|
CC Member
|
|
|
Join Date: Feb 2014
Location: White City,
SK
Cobra Make, Engine: West Coast, 460 CID
Posts: 2,908
|
|
Not Ranked
Chupee:
How about providing more details about your ignition system? You know, details that may actually help others help you to diagnose and fix the problem.
Details that will help: - distributor make and model,
- points vs electronic,
- ignition box or not,
- coil type (oil-filled vs epoxy) and
- coil mounting location and position (horizontal vs vertical).
__________________
Brian
|
12-03-2022, 05:23 PM
|
CC Member
|
|
|
Join Date: Oct 2021
Location: Woodland Hills,
Ca
Cobra Make, Engine: Aurora GRX
Posts: 104
|
|
Not Ranked
Quote:
Originally Posted by CompClassics
Last time I’ll bring it up, what kind of ignition are you running?
|
I am sorry to report, I do not know. Car is going back to Mcluskey to address all the things that have been brought to light!!!!
thx a lot!!!!!
|
12-03-2022, 09:29 PM
|
|
CC Member
|
|
|
Join Date: Feb 2013
Location: Carlsbad,
Ca
Cobra Make, Engine: SAI FIA, 289HP (5-bolt), 48IDA Webers
Posts: 1,244
|
|
Not Ranked
10-1 you will find that it is an ignition issue.
|
12-04-2022, 06:56 AM
|
|
CC Member
|
|
|
Join Date: Feb 2009
Posts: 1,695
|
|
Not Ranked
Quote:
Originally Posted by CompClassics
10-1 you will find that it is an ignition issue.
|
With so little information, for all we know, his gas gauge may not be accurate and when the gas is low and he goes around a corner, the car temporarily runs out of gas. He lets it sit an hour and it starts again.
|
12-25-2022, 05:12 PM
|
CC Member
|
|
|
Join Date: Oct 2021
Location: Woodland Hills,
Ca
Cobra Make, Engine: Aurora GRX
Posts: 104
|
|
Not Ranked
Update
PISSED OFF!!
So i take all these comments and send the car back to Mccluskey who I believe is one of the best for sure!
He replaces a few things that needed to be done
(1) Coil unit $34.00
(1) MSD billet cd distributor $375.00
Get the car back and drive for 10 minutes ALL IS WELL!
FASt FORWARD to Christmas Day!
I take it out and it is drivin nice and I'm listening to some tunes and I pass the freeway on ramp thinking maybe NOT YET!.. 500 feet later it's dead AGAIN
Look at my watch, it is almost exactly 40 minutes.
sit on the side of the road, but walked and got some water that someone has said that ahd worked prior. NO HELp
I nice guy comes walking down the sidewalk who seems to be a car guy.
I ask him to look in the carb and see if fuel is even going in.....
NOTHING!
No gas, no smell, notning!
Sit for 1.2 hours and nothing, Tow it home and here I ask
......
What THE HELL HAPPENED at 40 min that can STOp gas from flowing?
At home I spray starter fluid into the car 5 times and still nothing....
Thoughts?
|
12-25-2022, 05:44 PM
|
|
CC Member/Contributor
|
|
|
Join Date: Feb 2000
Location: Greenville,
SC
Cobra Make, Engine: 70 Shelby convertible, ERA-289 FIA, 65 Sunbeam Tiger, mystery Ford powered 2dr convertible
Posts: 12,703
|
|
Not Ranked
Quote:
Originally Posted by Chupee
PISSED OFF!!
So i take all these comments and send the car back to Mccluskey who I believe is one of the best for sure!
He replaces a few things that needed to be done
(1) Coil unit $34.00
(1) MSD billet cd distributor $375.00
Get the car back and drive for 10 minutes ALL IS WELL!
FASt FORWARD to Christmas Day!
I take it out and it is drivin nice and I'm listening to some tunes and I pass the freeway on ramp thinking maybe NOT YET!.. 500 feet later it's dead AGAIN
Look at my watch, it is almost exactly 40 minutes.
sit on the side of the road, but walked and got some water that someone has said that ahd worked prior. NO HELp
I nice guy comes walking down the sidewalk who seems to be a car guy.
I ask him to look in the carb and see if fuel is even going in.....
NOTHING!
No gas, no smell, notning!
Sit for 1.2 hours and nothing, Tow it home and here I ask
......
What THE HELL HAPPENED at 40 min that can STOp gas from flowing?
At home I spray starter fluid into the car 5 times and still nothing....
Thoughts?
|
Are you certain you were using starter fluid to try to start the car?
Did you check the connections from the coil to the distributor?
Did you check the connections both at the coil, and distributor harnesses?
Did you have spark when you got home and tried to start the car?
Have you checked the compression of all 8 cylinders?
Only take three things for the car to run:
Fuel
Spark
Compression
Time to eliminate each one.
Bill S.
__________________
Instead of being part of the problem, be part of a successful solution.
First time Cobra buyers-READ THIS
|
12-25-2022, 05:49 PM
|
CC Member
|
|
|
Join Date: Oct 2021
Location: Woodland Hills,
Ca
Cobra Make, Engine: Aurora GRX
Posts: 104
|
|
Not Ranked
Quote:
Originally Posted by Randy Rosenberg
I had a similar symptom, which was solved by removing the strainer/sock on the fuel pick up. We diagnosed the problem, by working backwards on the fuel system. When the engine died the carb bowls were empty.
|
Interesting, but should I not see fuel being dumped in while trying to start and giving it pedal?
thx
|
12-25-2022, 06:07 PM
|
CC Member
|
|
|
Join Date: Oct 2021
Location: Woodland Hills,
Ca
Cobra Make, Engine: Aurora GRX
Posts: 104
|
|
Not Ranked
Quote:
Originally Posted by mrmustang
Are you certain you were using starter fluid to try to start the car?
Did you check the connections from the coil to the distributor?
Did you check the connections both at the coil, and distributor harnesses?
Did you have spark when you got home and tried to start the car?
Have you checked the compression of all 8 cylinders?
Only take three things for the car to run:
Fuel
Spark
Compression
Time to eliminate each one.
Bill S.
|
Thx Bill,
I still have to ask the question from a NON-MECHANIC, that's me..
While trying to start the car there is No gas going into the carb bowls. Even with me standing on the gas pedal. What controls that simple action?
appreciated
|
12-25-2022, 06:10 PM
|
|
CC Member
|
|
|
Join Date: Sep 2018
Location: Howell,
NJ
Cobra Make, Engine: Backdraft Car #1209 Roush 427R
Posts: 607
|
|
Not Ranked
Had something similar issue a few years back. Intermittent issue. Changed the coil...nope. Gave the carb a good cleaning and adjustment.....nope. Wound up being a broken wire to the magnetic pickup in the distributer. I was lucky to find it. I had the distributer out and was testing the ohm reading on the pickup. One test would be good. Jiggle the wire, no good. Very lucky to find it. MSD ignition.
Fred
Last edited by FredG; 01-25-2023 at 06:19 AM..
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
All times are GMT -7. The time now is 07:55 AM.
Links monetized by VigLink
|