Jag Drive Shaft Yoke

48 IDA · #1 (**permalink**) 08-08-2002, 06:17 PM

ANYONE OUT THERE HAVE THE REAR MOST YOKE FROM THE
JAG DRIVE SHAFT? THE PART THAT BOLTS TO THE YOKE ON THE REAR END. I HAVE A CONTEMPORARY WITH A 67 E TYPE REAR.
THANKS FOR ANY HELP.

DON

RICK LAKE · #2 (**permalink**) 08-09-2002, 05:00 AM

Hi John. Have you tryed CWI in Cali. They have all the Jag parts that are used for these rears. You may try a Drive shaft company that builds for foreign cars? Good luck Rick Lake

Bob Putnam · #3 (**permalink**) 08-09-2002, 05:21 AM

If you're talking about the drive shaft part and not the differential input shaft, it's u-joint specific. Our 'shafts use a Spicer 2-2-459 flange.

48 IDA · #4 (**permalink**) 01-10-2003, 03:22 PM

Hi Bob,
I finally had time to install the spicer drive shaft yoke that you informed me about. It has worked out. The yoke went together
just fine. Thank you for your help

Don