replacing plastic oil line with.........

[Great Asp]

Craig Hill for "Top of the Hill" racing should be able to help.

I bought two "kits" from him for the Smiths gages in my SPFs to go to SS braided oil lines.

You can call him at 510-460-5297. The fittings are the tough part, I did not want to root for them.

Eric

[Whaler]

I looked into autometer's braided line that they push and it was going to be over 100 bucks CDN with fittings for that short run. So I went to our industrial aeroquip dealer, who specializes in hydraulics for industry and requested aeroquip's line used for hydraulics. It's nice looking and is not SS Braided on the outside. It also came with the required fittings that I asked for IE the small AN swivel 90 at the oil plate. At the gauge I used a female 1/8 MPT to AN adapter straight male and the run was 6 feet. Looks good...actually looks like the proper hoses one would use to the remote oil cooler on a kirkham.
The fittings were swaged on each end
The total cost with all fittings and in "AEROQUIP all the way" was 38 bucks CDN.
The fittings are the zinc plate anodized look and not the blue and red type

So Screw Autometer and their line.......

Tim

[NROTOXIN]

Top of the Hill racing has a new number
925 449-3330.
Great Asp, MrMike is correct...it is ONE STOP SHOPPING on these ss hose kits. He installs them on all the cars he builds and he has done ALL the RnD/footwork for you.

curtis