bell housing

Donington Pete · #1 (**permalink**) 10-10-2003, 07:57 AM

Does anyone know where to find a bell housing to mate a 429 to a tremec 3650 or even if there is such a thing.....? or conversion plate..? etc.

Clois Harlan · #2 (**permalink**) 10-10-2003, 08:25 AM

Pete,

It should be the same as a 460 engine. I believe McCloud clutch and bellhousings should be able to assist you. Call Red Roberrts at McCloud at:

714-630-3668 main tech line

714-630-2764 fax line

Good Luck!

Clois Harlan

Mr.Fixit · #3 (**permalink**) 10-10-2003, 08:25 AM

Lakewood sells the one you need. I don't have the part number handy, but any of their distributors should be able to help. I have used Lakewood scattershields to put a tremec behing 460's.

Donington Pete · #4 (**permalink**) 10-10-2003, 10:38 AM

Thanks guys, I'll try them both
Pete

Bill E · #5 (**permalink**) 10-12-2003, 02:05 AM

I have used both Bell housings the McCloud is the one we will use from now on it did not need as much aligning as the lake wood and can be trimmed on the bottom for ground clearance, and is a one peace Hydra formed bole. Bill E