ERA Owners Please help

Rick Parker · #1 (**permalink**) 10-18-2003, 02:54 PM

I am trying to complete a rewire this weekend and have run into a potential problem. Would one of you ERA owners please help me out by posting the Part number printed on the label of the black plastic Tail light relay box ( 2 1/2" x 2" x 1") that is mounted on a metal plate under the dash panel. I need to purchase one locally this weekend to finish the project. It has 2 wires (yellow & green) on one end, with 3 (red, yellow, green) on the other.

Thank you in advance

Rick

chopper · #2 (**permalink**) 10-18-2003, 04:10 PM

Rick:

See this thread:

Signals don't work

The short answer is it's a Signal Stat 180 flasher (that's what's in my car and apparently in the car of this owner also). This subject came up earlier and of I'm not mistaken, the answer from the illustrious Mr. Putnam was that any 12 volt flasher which has the correct connector configuration should work.

Rick Parker · #3 (**permalink**) 10-18-2003, 06:34 PM

Chopper:

It is not the flasher I am asking about, but rather the device that diverts the stop and turn signal lights to the rear. The item in question is actually a trailer wiring accessory/adapter that is used by ERA. I have the #180 flasher. Just no stop lights.

Thank you

Rick

Rick Parker · #4 (**permalink**) 10-18-2003, 09:12 PM

Got it resolved, all lights are now functional and working.

Sometimes it is hard to see through the trees if you are in the middle of the forest!!!!! Daaaaaa

Thanks

Rick