Need Close-up Pics

Trueoo7 · #1 (**permalink**) 03-05-2004, 10:15 PM

Does anyone have any closeup pictures of how the front hoop bumper attaches to the overriders. Never can see up close enough in the majority of pictures out there. Do you need to make any modifications or brackets to the overriders to get the hoop to fit??
Thanks
Trueoo7

Trueoo7 · #2 (**permalink**) 03-06-2004, 03:24 PM

Just bringing this back to the top again.

DavidWard · #3 (**permalink**) 03-06-2004, 06:13 PM

No close-up pics, but mine bolts to the inside of each over rider with two 1/4" bolts on each side. Two holes are required in each over rider.

David

TerribleTed13 · #4 (**permalink**) 03-06-2004, 06:20 PM

The overiders I have allready have holes and a nut tack welded in them. Sorry not sure on the supplier/manufacturer.

Trueoo7 · #5 (**permalink**) 03-12-2004, 08:00 PM

Ted
Did you buy the overiders that way or did you have to modify them?
Trueoo7

TerribleTed13 · #6 (**permalink**) 03-12-2004, 08:26 PM

True007,
The overiders came that way, no mods needed. 2 nuts welded to the inside of each overider, when mounted on the car, they face toward the center of the car/toward each other.
Hope this helps.