tremec bellhousings

NMattison · #1 (**permalink**) 03-13-2004, 02:17 PM

i have a tremec tko with tremec bellhousing, and im looking for the boot to go over my clutch fork. does anyone have the part number for this boot? and where do i get this critter i have checked with jegs and summit and they didnt have a clue.

slithering · #2 (**permalink**) 03-13-2004, 07:20 PM

NMattison,

The only boot made for the Lakewood bellhousing is a Chevy application only. I contacted their tech support and was told that most don't use one. The only way to solve your problem, at this time, is to make your own.

Chris,
slithering

DonC · #3 (**permalink**) 03-14-2004, 08:20 AM

NMattison:
Take a look at what Enzo has to offer at Finishline. He advertises on this site.
DonC

mbishop · #4 (**permalink**) 03-14-2004, 10:37 AM

NMattison,
The one for a small block from Enzo doesn't fit the Tremec bellhousing or atleast the one I have from Finishline doesn't. I'm in the same search as you. I've narrowed it down to a '95 Mustang Cobra R that used the Tremec and the same bellhousing. I have a drawing with some numbers on it, the local Ford parts guy says they are not part number but is trying to cross it to something the computer will under stand. I soon as I get something I will post it here.

Good luck,
Mark