Looking for knock off!!! Help!!!

Jagpower · #1 (**permalink**) 02-20-2008, 10:10 AM

Hello all. I am doing some work on a Contemporary Classics Motors 427 s/c replica built in 1985.
It has a push on center wheel knock off with a locking set screw . This is not a screw-on type.
Does anyone know where I could find one of these quickly? Please help.
Write me back with any info you may have. Thanks.

streetrod1927 · #2 (**permalink**) 02-20-2008, 11:08 AM

What kind of wheels are they? I have a CCX w/halibrand K/O''s there is no set screw.

Pete Wolff · #3 (**permalink**) 02-20-2008, 06:54 PM

Compomotive wheels ?

Pete Wolff · #4 (**permalink**) 02-20-2008, 06:58 PM

Compomotive wheels ? If so I have spinners.

Blas · #5 (**permalink**) 02-20-2008, 08:58 PM

Look here....

Superformance Cobra Knock Offs, Parts Accessories, Radio Control items on eBay.com

Jagpower · #6 (**permalink**) 02-21-2008, 10:48 AM

Yes I believe they are Compomotive wheels from England.

Jagpower · #7 (**permalink**) 02-21-2008, 10:54 AM

Hello Pete Wolff, I didn't take pictures of the spinners this car had on, I should have. But if you have pictures of yours you can email me, I could let you know if they are the same. The car I was working on has the ones that just push in the center of the wheel and a locking screw is screwed in from the side in the center of the wheel into a groove on the back side of the knock off.

Pete Wolff · #8 (**permalink**) 02-21-2008, 01:30 PM

Email me at pjw101257@aol.com and I will send you a picture. If I knew how I would post a picture here.

Pete

767Jockey · #9 (**permalink**) 02-21-2008, 07:40 PM

Pete,
I have a older Contemporary that had the same wheels. They are Compomotives. The setscrew into the side of the spinner is how the Compy's held the spinners on.
Doug

1985 CCX · #10 (**permalink**) 02-21-2008, 07:42 PM

I agree, Compomotive wheels from England.