Roll Bar Bezels

PFSlim · #1 (**permalink**) 04-15-2009, 11:06 AM

Guys

I am looking for some chrome roll bar bezels that fit a 1 1/2 inch roll bar. Does anyone know where the best place to purchase these?

Thanks in advance

Paul

MFE III · #2 (**permalink**) 04-15-2009, 11:38 AM

I used these. . . .
http://www.norcal-cobras.com/store/r...uss_garage.htm
. . . . look great.
Matt

mickmate · #3 (**permalink**) 04-15-2009, 12:06 PM

Enzo and Paula at Finishline have these. http://www.finishlineaccessories.com...roducts_id=218

jwd · #4 (**permalink**) 04-15-2009, 03:33 PM

It depends on the angle of the rear brace. If it is just barely angled, the round ones from Finishline will work. If it is more angled like the originals, you'll need an oval shaped one for the brace and you'll have to go with the one Matt above linked to . Those are the ones I have and they are very nice. Look in my gallery for the angle of the brace.

Jim

PFSlim · #5 (**permalink**) 04-16-2009, 12:20 PM

Mine are angled so I think the ones that Matt linked will work fine. I will get a set on order. Many thanks to those who responded.

Paul

Bernica · #6 (**permalink**) 04-20-2009, 05:46 PM

Quote:

Originally Posted by mickmate

Enzo and Paula at Finishline have these. http://www.finishlineaccessories.com...roducts_id=218

The ones Mickmate mentions are what I went with. A photo in my gallery of them installed. Can be tricky with the one for the angled rear post, but I am happy with them.