Moto Lita MK3 Wooden Steering Wheel

Tampa427Cobra · #1 (**permalink**) 04-08-2014, 02:22 PM

I purchased a Moto Lita wood MK3 wheel from Finish Line Accessories. I have a six bolt pattern Grant wheel currently and thought the new wheel would just fit to the same pattern. The pattern is off so now I need an adapter or a new wheel hub. Has anyone done this already? I don't want to purchase the wrong adapter or wrong hub.

601HP · #2 (**permalink**) 04-08-2014, 02:34 PM

This is most likely the component you need.

David

blown871 · #3 (**permalink**) 04-09-2014, 06:00 AM

$$ ouch.

Hotfingrs · #4 (**permalink**) 04-09-2014, 11:40 AM

I bought a wheel from Finishline over the winter. Went to put it on last week and found the same thing, different six bolt pattern. I took the old wheel and the new wheel to a machine shop I use and had them drill and counter sink the holes I needed. Cost me 30.00.

1985 CCX · #5 (**permalink**) 04-09-2014, 02:57 PM

What kinda car you have?

indianamoon · #6 (**permalink**) 04-17-2014, 09:03 AM

send me some pics of the wheel and hub. I can probably machine something up pretty cheaply, or re-drill the hub that you already have with a new pattern.

Pat