Antique and collectible guy needs motor mounts

jerry w · #1 (**permalink**) 11-03-2004, 02:52 PM

Ok guys,

Where can I get motormounts for my 302? I have the frame(motor) mounts From Antique and Collectible, and I have these old mounts that came from the car the engine was originally in. I would like to put new mounts on the engine? I appreciate all who reply.

Jerry

PNJSNAK · #2 (**permalink**) 11-03-2004, 07:31 PM

jerry
You can get standard mounts from NAPA. That's what I did for my 351. I thought I wanted to reduce the amount of engine torque movement. Thought I would go with the Polyurethane mounts, not available for "70 351's. There is a lot of stuff on the threads about mounts. Do a search.
I decided to buy some from Mite Mounts in Calif. They said that they reduce the amount of movement. After spending $125 and putting them on, they only reduce the amount slightly. A bit disappointed. Good Luck
Jim

Roscoe · #3 (**permalink**) 11-04-2004, 06:52 AM

I got standard mounts from Mustangs Unlimited for about 12 bucks each.

Roscoe

jerry w · #4 (**permalink**) 11-04-2004, 02:30 PM

Jim & Roscoe thanks for the reply. I am going to look up Mustangs Unlimited right now!

Jer

Roscoe · #5 (**permalink**) 11-04-2004, 02:42 PM

http://www.mustangsunlimited.com/key...ds=motor+mount

Actually I think this is the one you are looking for

http://www.mustangsunlimited.com/ite...asp?T1=2286+01

And check out the tranny mount

http://www.mustangsunlimited.com/ite...3+01&dep_key1=

Roscoe

NMattison · #6 (**permalink**) 11-11-2004, 02:32 AM

Hi Jerry the part # from Napa for a small block motor mount for the a&C is 602-1151 and i believe i paid around $25.00 for them and they work just fine . well good luck with your car. any questions give me a shout. Neil