Rad From Finish line

[Automan]

Anybody buy the rad from finish line for thier Antique and Collectable Cobra frame. If so how did it work. Ac has one but its another 100.00 more then the one at finishline. Finish line's is also aluminum.

Any info. would be greatly appreciated
Thanks
Automan

[COBRAGAR]

measure what size you need height/width and depth also where the inlet/outlet and try griffin or other rad. company .hope this helps

[Roscoe]

I had Afco build me one. it is an aluminum racing rad, standard Ford size 19 x 26, AN--16 fittings, blocked off the filler cap and installed a petcock drain. Total cost was around 250.00.

I originally had a Griffin but it leaked at a bad weld.

I layed the rad in the A&C lower mount and riveted and/or bolted some flat stock to secure the top. Been on for years. No problems.









PRODUCT: 80103FN
Aluminum Radiator - 26in. Ford
Put An “N” To Your Cooling Problems!




Furnace Brazed Cores
-Eliminates sealing problems and need for epoxy on tanks.
16 Fins Per Inch Core
-Allows more airflow to provide better cooling.

Cores Includes Mount Type Flanges.
-Simplifies mounting.

The new AFCO N Series Racing Radiators offer you the best value in cooling your race car. We have taken our most popular sizes and styles and made them available in this series. Increased production capacity, elimination of epoxy sealant (not needed in furnace brazed core) and more efficient testing methods have allowed us to lower the prices on a true quality product. Don’t be fooled, these are the same high quality 16 fin per inch cores that AFCO has always featured, not the older style cores some manufacturers offer. When you think quality and value, think AFCO ”N” Radiators.
http://www.secureperformanceorder.co...es/80103fn.jpg

We can custom build nearly any size or style radiator. CLICK HERE TO GO TO OUR CUSTOM RADIATOR OPTION PAGE -
You can choose from all available options and sizes to build your radiator on-line.


roscoe
http://www.priveye.com/cobra.htm