Club Cobra
Page 1 of 2 1 2
Show 20 post(s) from this thread on one page

Club Cobra (http://www.clubcobra.com/forums/)
-   Arizona Cobra's (http://www.clubcobra.com/forums/arizona-cobras/)
-   -   Penske Museum Cars & Coffee (http://www.clubcobra.com/forums/arizona-cobras/137369-penske-museum-cars-coffee.html)

Bob Broberg SPF667 460BB 10-13-2016 06:22 PM
Penske Museum Cars & Coffee
 
Just a reminder for Saturday about 7am to perhaps 9am. Free coffee so you know Robert will be there (if he gets his clutch MC & SC parts.)
http://i211.photobucket.com/albums/b...psv00bxn7k.jpg

AZ Bob

moore_rb 10-14-2016 03:20 PM
Free coffee... I'll be there, whether my car is broken, or not :3DSMILE: I'll just show up in my sweet old F350 farm truck.:LOL:

Actually- the car is all back together. The Fedex dude showed up with my parts this morning about 10am. I just need my assistant pedal-pusher to get home from roller skating, so I can bleed the clutch, and I should be ready for a test drive... :cool:

Phx Mike 10-14-2016 05:16 PM
I will be there

moore_rb 10-14-2016 06:37 PM
Clutch is back together, and test drive went well.

I'm planning to be at Penske by 7:00

Phx Mike 10-15-2016 10:08 AM
Nice day out there today

http://i1082.photobucket.com/albums/...sxbnbkgos.jpeg


Here's another one showing Robert's new ride with mine and Dan's next to it

http://i1082.photobucket.com/albums/...svgwtyfeg.jpeg

Bob Broberg SPF667 460BB 10-15-2016 11:18 AM
We missed you Karl, Dan and Keith.
Good coffee!
AZ Bob

Cobrakeith 10-15-2016 03:20 PM
Sorry I couldn't make it, looks like you had a very good turnout this morning. Great weather for it too. Love the lineup, great picture, nothing looks better than a group of Cobra's!

Karl Bebout 10-15-2016 03:52 PM
I've been busy ripping and tearing. Pulled my dash to correct a couple lighting issues and to install my new Speed hut GPS speedometer. Finally had enough of my SW unit. Glad you had a good turn out.

DWRAT 10-15-2016 04:19 PM
Quote:
Originally Posted by Bob Broberg SPF667 460BB (Post 1406182)
We missed you Karl, Dan and Keith.
Good coffee!
AZ Bob
We did the Grand Canyon today.
Looks like you had a good turn out.
Did Robert make it with his new car???
I don't see it in the line up, all those cars have there hoods up.:confused:

nniets 10-15-2016 04:49 PM
Quote:
Originally Posted by Karl Bebout (Post 1406188)
I've been busy ripping and tearing. Pulled my dash to correct a couple lighting issues and to install my new Speed hut GPS speedometer. Finally had enough of my SW unit. Glad you had a good turn out.
Lighting issues? Let's talk. I have no dash lights. I also want to connect a cigarette lighter for phone charging. Schematic says there are already power and ground wires for it. Looks like a PITA to pull the dash.

Ron

Phx Mike 10-15-2016 04:56 PM
Quote:
Originally Posted by DWRAT (Post 1406189)
We did the Grand Canyon today.
Looks like you had a good turn out.
Did Robert make it with his new car???
I don't see it in the line up, all those cars have there hoods up.:confused:
Robert did have his car there (it is all the way down at the far end of the lineup). It looks GREAT and runs nice too....

moore_rb 10-15-2016 06:25 PM
Quote:
Originally Posted by DWRAT (Post 1406189)
Did Robert make it with his new car???
I don't see it in the line up, all those cars have there hoods up.:confused:

I was there, with my hood open, and you missed it..!!! :p

Actually, my hood was open because I was checking my replacement Master and Slave cylnders to make sure there were no leaks around the fittings. :LOL:

and, there weren't :cool:

DWRAT 10-15-2016 07:29 PM
Quote:
Originally Posted by moore_rb (Post 1406197)
Actually, my hood was open because I was checking my replacement Master and Slave cylnders to make sure there were no leaks around the fittings. :LOL:

and, there weren't :cool:
I guess that make sense considering what you made 100% clear in the past about cars at shows with open hoods.:eek::eek::eek:

Cobrakeith 10-15-2016 08:22 PM
Quote:
Originally Posted by Karl Bebout (Post 1406188)
I've been busy ripping and tearing. Pulled my dash to correct a couple lighting issues and to install my new Speed hut GPS speedometer. Finally had enough of my SW unit. Glad you had a good turn out.
Hey Karl, how hard is it to pull the dash? Did you have to take the steering wheel off in order to get to the speedometer?

Karl Bebout 10-15-2016 09:51 PM
I pulled the steering wheel to have more room to work. Wanted to get the steering column out of the way, but will need to talk to Peter, on Monday. According to the build manual, I was doing it right, but didn't have any luck.I did loosen the clamp so I could move the column up and down and pulled the screws/bolts so the dash would drop enough to let me get at stuff. Not all that bad, but maybe getting the screws/bolts back in might be tough. I'll find out tomorrow. Was able to run the Speedo GPS antenna up through the defrosted vent, so it'll hardly be noticeable. Wiring is all done but hooking up a constant hot and a keyed hot. Speedo looks good and has a lifetime warranty.

nniets 10-16-2016 07:09 AM
Quote:
Originally Posted by Karl Bebout (Post 1406201)
I pulled the steering wheel to have more room to work. Wanted to get the steering column out of the way, but will need to talk to Peter, on Monday. According to the build manual, I was doing it right, but didn't have any luck.I did loosen the clamp so I could move the column up and down and pulled the screws/bolts so the dash would drop enough to let me get at stuff. Not all that bad, but maybe getting the screws/bolts back in might be tough. I'll find out tomorrow. Was able to run the Speedo GPS antenna up through the defrosted vent, so it'll hardly be noticeable. Wiring is all done but hooking up a constant hot and a keyed hot. Speedo looks good and has a lifetime warranty.
I have to retrieve my brother-in-law from a nursing home between about 9:00 AM and 4:00 PM, but if you need a second pair of hands to hold something, call me. -Ron

Cobrakeith 10-16-2016 08:28 AM
Quote:
Originally Posted by Karl Bebout (Post 1406201)
I pulled the steering wheel to have more room to work. Wanted to get the steering column out of the way, but will need to talk to Peter, on Monday. According to the build manual, I was doing it right, but didn't have any luck.I did loosen the clamp so I could move the column up and down and pulled the screws/bolts so the dash would drop enough to let me get at stuff. Not all that bad, but maybe getting the screws/bolts back in might be tough. I'll find out tomorrow. Was able to run the Speedo GPS antenna up through the defrosted vent, so it'll hardly be noticeable. Wiring is all done but hooking up a constant hot and a keyed hot. Speedo looks good and has a lifetime warranty.
Thanks Karl, I was thinking of changing the dash to the FIA style but may have to rethink that if you are having trouble with the steering wheel. I'm not sure I want to go to all the trouble when the street dash works just fine. I'll talk to you about your experience later tho. I looked at the speedometer you are putting in and it really looks good, should be really nice when you get it installed, no more guessing how fast you are really going.:LOL:

Karl Bebout 10-16-2016 08:49 AM
With my SW speedo, I just didn't know if I was doing 120 or 110? The new one will also capture high speed, but can easily be reset.

Cobrakeith 10-16-2016 08:52 AM
Quote:
Originally Posted by Karl Bebout (Post 1406227)
With my SW speedo, I just didn't know if I was doing 120 or 110? The new one will also capture high speed, but can easily be reset.
I assume it is the Cobra style as shown on the web site, if so it will look like the other SW gauges in the dash, very nice and you will be able to know for sure you are going 120:).

Danr55 10-16-2016 09:03 AM
I didn't know Karlos had a speedo the reads in KM/HR.


All times are GMT -7. The time now is 07:10 AM.
Page 1 of 2 1 2
Show 20 post(s) from this thread on one page

Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: