I really, really, really need a 4 into 4 header.

[John-Tucson]

Hi guys, I am ready to start putting my Cobra back together, however, I need a passenger side 4 into 4 header. It can be coated or plain, new or used. I need it to fit a 302 and FFR body. Give me a call at 520-825-9197 and I'll come to your place and pick it up. Also, if anyone has some left over press-on bulb seal from their FFR kit I would like to buy it, anything over 12" is fine. Thanks, John

[Gordon Levy]

John, I think I have a pass header for you.
You can buy that bulb seal from any upholstery supply house or from mcmastercarr.com

[John-Tucson]

Gordon, let me know if you have that header and I'll be up there. The bulb seal that I have found at the local shops is 1/2 the size of what FFR uses. Thanks, John

[Gordon Levy]

John, found the header. Give me a call at 520-494-2745.

[CobraEd]

What this am ???

"press-on bulb seal"


.

[Gordon Levy]

Before the body is installed there is a bulb seal the goes from the aluminum to the body to seal everything off. It is basically like the seal material in the doors of your everyday street car.

[arizonacobra]

I also have a mismatch, I have a ceramic coated set one with a four into four and one is a four into three.

Anyone else have a mismatch that might want to correct a pair of sidepipes.....

[John-Tucson]

Gordon had a passenger side 4 into 4 that I needed. I am now on my way to getting the Cobra on the road once again. For Arizonacobra, if you need a driver's side 4 into 4 header I have one. John