|
Gasket Help Discontinued VR # 95074
Fellow Cobra owners/friends I am in desperate need to locate some intake gaskets manufactured by Victor Reinz (Dana) for my 429SCJ. The discontinued part number is 95074 and I am not sure when they stopped manufacturing these gaskets but they are the only ones that seem to hold up on my motor. And yes, I have tried the others but the composite makeup of the VR gasket’s seemed to be the best.
If anyone has a lead on a set, or a couple of sets of these intake gaskets I would really appreciate it. I have tried the local parts stores and even called VR which has zero inventory. I was hoping that there might be some over seas or stashed in someone’s part store somewhere. Please contact me with any information on these gaskets as I am trying to get my motor back together. Thanks in advance, Brian |
Brian, I put on VR #95109SG gaskets from NAPA. They list your motor as a fit. They fit my CJ heads perfect. I tried felpro but fit was lousy.
Hope this helps. AZ Bob |
I just bought a set 95074SG from a CarQuest auto parts store. they didn't seem to have a problem getting them
|
Brian..
Remember we have a discount at CarQuest. Mike |
All thanks, I will try the other part numbers that are listed. I did manage to locate 1 set of the gaskets that I was looking for so hopefully I will not make any mistakes. They had to order them thru carquest and should be here in a day or two.
Mikec how do we get the discount at carquest? Tell them we are with the AC cobra gang??? :eek: (most likely be arrested at that point!):LOL::LOL: |
Brian, just tell them you get a 10% group discount for being member of the Arizona Cobras. Their District Manager Scott McClain is a member.
AZ Bob |
Bob is correct..............
Mike |
Well no luck, they could not get them in...
Cal Bullet can you give me the number to the store where you just purchased these? I have the Ford SVO SCJ heads with the 2.60 X 2.24 ports, my intake is port matched so it gets tricky on the gaskets that I use. Thanks for the help.... |
BP I called the CarQuest at 955 Fee Drive 916 489-1550 in Sacramento. I think any CarQuest should be able to supply you.
ask for Clint Mel |
BP I just called my buddy at CarQuest. they have one set left. I have it on hold for you. ask for Clint, tell him its the gasket set saved for Mel
Mel |
Mel,
Thanks again, the trick was to add the "SG" to the end of the part number and then they were comming out of the wood work. Clint was able to check the AZ inventory from CA and located 3 sets right away... :):):D:):) Thanks again, Brian |
Brian, happy to hear everything worked out for you..
Mel |
OK I have Gaskets in hand! Thanks for the help, now all I need is my rings from Total seal and I will be in business. I painted the block on Sunday with POR15 high temp engine enamel and boy does it shine! I can't wait to get this beast back together it has been 3 months since I last drove her at PIR.
We WILL see everybody at Route 66, #381 Brian |
| All times are GMT -7. The time now is 01:34 PM. |
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: