Coolant header tank

albanycobra · #1 (**permalink**) 01-07-2011, 10:15 PM

Hey Guys
I need to replace the leaking coolant header tank in my G-Force.

I need a tank with a rad cap fitted and 38mm (1 1/2) inlet and outlets to connect to my rad hoses. Any ideas on where / what to get?

Dave

renovationinnov · #2 (**permalink**) 01-09-2011, 02:20 AM

kirkham motorsports have a new alloy one try there site for cost / or try a locol radiator mob they will have someone they know .....cost ?

gjkrv8 · #3 (**permalink**) 01-09-2011, 05:29 PM

Hi Dave,

Try Shaun Mellish in NSW 0404295199.

He made mine, was reasonably priced and fat turnaround.

He has been on the forum in the past.

Rgds

gregg

Tenrocca · #4 (**permalink**) 01-09-2011, 05:46 PM

Could you just use an inline filler:
http://www.summitracing.com/parts/CSI-973/?rtype=10

Merv and Sharon · #5 (**permalink**) 01-09-2011, 06:53 PM

I used the one above with an overflow tank off the side. Not a problem and neat.

hsv300 · #6 (**permalink**) 01-09-2011, 08:37 PM

I used One as above but from PWR.

stephen low · #7 (**permalink**) 01-10-2011, 05:44 AM

Mine is for sale if you want to go in-line filler as I am now using a modified Ford filler neck instead.