BRM knock on wheels forsale

[Modena]

Yep, not when I dont know what they are though, otherwise it'll just be me trying to offload them

[DaveW]

If they have an engraved number like this:
20.4564.00
then they are off a porsche, otherwise, i dont believe any of the aftermarket or other factory fit brembos have id markings

Dave

[Aussie Mike]

If the calipers are radial mount I'll take the brake setup. I've been looking for an upgrade for my falcon.

Cheers

[albanycobra]

Good news is Mike I have some Radial mounts that you can have with them to copy or modify. Please send me an email to confirm.

[albanycobra]

Here's a pic of the radial mount i will chuck in with it. it mounts the radial caliper to the standard set up........

ALL SOLD GUYS.

Thanks Dave

[albanycobra]

While I'm on a roll here's a lovely Holley carb looking for a new home.....it has a bit of damage to the plastic choke thingy........Make an offer...

[boxhead]

What size is it?
Looks to be Vac secondarys
There should be a "List" number stamped into the flat section on intake area near choke flap.

[albanycobra]

It's a little Mumma......

600 I think Vac sec.

Number on carb 80457-2 0876

Let me know?



Cheers
Dave

[boxhead]

80457 is a vac secondary 600.

[albanycobra]

You wanni???

[Aussie Mike]

Go on Dave (Boxhead), buy it and bolt it on George.

[BMK]

I have a 850 Holley - new of the 468 Shelby.

I replaced it with the new Holley aluminum ultra HP.

PM me if interested.

Bernie

[albanycobra]

Cmon Bernie.....you're on my Turf Lad..........

I have the best carby.........The 600 Vac secondary carb will be a collectors item one day, if you buy this little beauty it will give you great memories like burning your eyebrows off when it back fires or lets you down in front of that hot chick as it refuses to start your engine from heat soak........Nothing like the feeling of standing on the gas to impress your Mate and hearing your awesome engine cut out and cough. You can have all this fun, You can curse and swear as you dodge up the accel cable. You can drop your wing nut down the throat as you try to line up the airfilter. You can drain all the power out of your motor with this choker......Cmon what are you waiting for???? Get in before someone else gets this package of fun.........

[750hp]

Hahaha, who could pass up such an opportunity!

[boxhead]

Originally Posted by Aussie Mike

Go on Dave (Boxhead), buy it and bolt it on George.

He already has one exactly the same.


I was thinking it may suit engine into Charger, but 600 will be too small.

[Aussie Mike]

I've used 600 Vac sec holleys on a couple of cars in the past. They have generally been good and easy enough to set up once you understand holley tuning. You can buy everything for them to dial them in and there are plenty of good holley tuning books out there. I used to rely on a vacume guage and checking plug color to help me with the setup. These days it would be so much easier with a wideband O2 sensors available.

Cheers

[justcobra]

Originally Posted by albanycobra

wheels sold to justcobra.......


cmon someone must want some big brakes.....make an offer they have to go.

Took delivery of the wheels and tyres 29/1/13

Excellent packaging and the wheels / tyres / adapters and spinners are in a very good condition considering that no road kilometres were done.

All that is required is a abandoned Gulf Ford GT40 project to compliment the package.

Three photos are attached for the community to peruse.

Excellent communications with the selller and will deal again!

[Aussie Mike]

Just had a call from the freight company. looks like my package has arrived too. I'll pick it up on the way home. Hooray!