|
LS3 accelerator pedal. (Sideshow?)
Does anyone know if the LS2 accelerator pedal is the same as the LS3 as per this ebay ad?
http://www.ebay.com.au/itm/Commodore...#ht_1817wt_910 Sideshow? |
Depends what loom u have
Vz has 8 pin square ish oval plug Ve has inline 6 pin plug And the gmmp loom has a different plug all together |
I just saw the price
I think they are cheaper thru holden |
Thanks for that.
I think i have to change the plug because I have a loom from psi conversions which I think is a different pedal in the US. I have Holden ECU with a 2009 hsv tune with security removed. The computer has been used in an hsv by a guy whilst he had his original computer out getting maffless. I also got the AFM that he removed so I have a known combination there, but just need pedal. I will give Holden a call and ask for a 2009 hsv pedal I guess. Last time i did that with bell house bolts they gave me ones for a 6cyl! Thanks for the help |
ok cool
what is your engine as there are minor differences alot of people dont know about anyway just wire it all up and take it for a drive and if there are issues take it to sams performance for a proper dyno |
I bought my ls3 from Sam's performance. It's from a 2009 hsv club sport. It was one of the ones they removed to put in the w427.
|
yes i remember the ones
your ecu should be fine if its similar year to engine does your loom have correct plug for map sensor too |
Yes, correct 5 pin inline
Just checked the pedal plug it 6 pin inline. Hopefully that is correct. Don't know why I thought it was different. Looks like a well made loom from PSI, but I guess I will wait to see how shortening required to suit cobra. |
USA 6 is different
Aussie 6 is rectangle USA 6 has rounded ends Just goto wreckers and get one of a ve comm if your is different Then ring psi and ask for the correct wiring for it hehehehe |
http://www.clubcobra.com/photopost/data/500/image24.jpg
I was right the first time then! That's cool, will see if I can get a connector from Holden. I just need to check wire colours are the same for Australia. Do you have a source for wiring diagrams? Only ones I have are us. |
sorry I don't hand out any diagrams
someone on here is bound to be able to help everyone knows how much I hate the looms from USA u won't get plug from holden only from wreckers or USA I got two but I only sell them for my customers who want proper accurate looms so maybe go round some wreckers and cut plug off a ve |
Looking for a source to buy the diagram not asking you to breach copyright. Is there a workshop manual that has them?
I don't think wreckers will be in a hurry to cut up looms given the demand for transplant parts. Unless the rest of the loom is damaged I suppose. To be honest I find wreckers too hard to deal with. Will try and get a delphi part number to source the connector. |
cool
Sorry i just don't hand or sell any diagrams out even to my best friends looms from USA save u abit of cash but not the headaches hehe it's not what u know its who know these days maybe try some other guys on here that have done their own looms |
Does the map sensor plug in ?
Also the oil pressure switch |
cool
Sorry i just don't hand or sell any diagrams out even to my best friends looms from USA save u abit of cash but not the headaches hehe it's not what u know its who know these days maybe try some other guys on here that have done their own looms |
oops double post
|
Quote:
I priced up the parts to build the whole loom myself and the cost of parts was way more than the full loom from PSI. In the end i am planning to pull it all apart anyway as i hate the look of the big ugly black plastic worm running around modern engines. Plan is to run the top engine wires through polished stainless tubing next to the fuel rails. Coil wires will go through AN hose into polished alloy coil covers i am going to make up. Im going to try and make it look like PCV lines. If i was to pay some one to do what i plan on doing it would cost thousands and i wouldnt get the satisfaction of doing it myself. |
cool
ill sell u the correct plug and wiring diagrams for a grand that's the price difference from a proper loom to a loom from USA hehehe that would satisfy me just kidding |
Ok, I will send you a skip bin of 5c pieces.
Thanks for your help, much appreciated. |
Cool
Ill have something to throw all my gmmp looms in Anyway go out to pick n Payless they sometimes get ve commodores in U might find a pedal plug in them |
| All times are GMT -7. The time now is 04:01 PM. |
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: