bumper bars fittment

renovationinnov · #1 (**permalink**) 08-03-2013, 04:33 AM

ive started to drill all the holes in the body but!!
now how far are the bars & BUMPERS fitted off the body as I have no build manual to work off as I have a venom motor sports there in no build manual as you all aware so I need to find out what space between the body front & rear
any help is valuable thanks again
rob
pics are good too

sambo · #2 (**permalink**) 08-03-2013, 05:41 AM

I checked a few cars at a recent meet and the front hoop looked good about 1" off the nose. I guess if you locate the rear bar 1" off the nearest surface (body or tail light) you should be right.

dhs.buckley · #3 (**permalink**) 08-03-2013, 03:25 PM

Quote:

Originally Posted by sambo

I checked a few cars at a recent meet and the front hoop looked good about 1" off the nose. I guess if you locate the rear bar 1" off the nearest surface (body or tail light) you should be right.

Yeap measured mine, just over an inch from the center of the front to the hoop, rear bars vary a far bit depending on brand.