bits n' Pieces to move

muzzza · #1 (**permalink**) 10-25-2015, 10:24 PM

Some billet suspension arms. ( Can supply drawings / info )

PM me if any interest. Muz

leroy17 · #2 (**permalink**) 10-25-2015, 11:05 PM

Those billet arms could just hang on the wall as art, never get tired of looking at billet.

muzzza · #3 (**permalink**) 10-26-2015, 04:47 AM

A bit more info on billet suspension arms. I had these arms made to take advantage of positive offset Corvette wheels that I was intending to run on my "Pace" car. Note that the hub is moved closer to center line of wheel. I have also introduced "Modified" Ackerman steering geometry and changed progression by moving steering rack toward axle centre. ( see sketches )
The main object of this setup is smoother cornering with less understeer and to do away with static toe out - which can make the car unstable.

Aussie Mike · #4 (**permalink**) 10-26-2015, 05:52 AM

Some one with a Pace should jump on those arms quick smart. Sounds like the trick track day setup to me.

Cheers

muzzza · #5 (**permalink**) 10-26-2015, 04:49 PM

Note.....Stainless overriders have been sold. Muz

leroy17 · #6 (**permalink**) 10-26-2015, 05:40 PM

Quote:

Originally Posted by muzzza

They look like Larry Perkins's glasses there Murry, good engineering support right there.

750hp · #7 (**permalink**) 10-27-2015, 04:34 AM

Quote:

Originally Posted by muzzza

Do you have a spring fetish Muz???

muzzza · #8 (**permalink**) 10-27-2015, 05:14 AM

Quote:

Originally Posted by 750hp

Do you have a spring fetish Muz???

Craig, Fetish !!! Not me..........just doin' some Late "Spring Cleaning" before we move into summer. Muz

muzzza · #9 (**permalink**) 07-11-2016, 01:00 AM

I still have some of my Pace bits on the shelf. Details of components can be found earlier in this post.....will look at any offers - sensible or otherwise !!

longer heavier push rods and joints to rear and steering adapters

revised toe link and steering brackets.

750hp · #10 (**permalink**) 07-11-2016, 03:16 AM

Leroy - it's not too late. Sweet talk Muz into paying you a visit to front-half the Arntz chassis and retrofit some billet loveliness...

leroy17 · #11 (**permalink**) 07-11-2016, 06:44 AM

Stop it !

Seriously though, it's worth thinking about. But these really should have been snapped up by someone with a pace as a cool alternative to run different wheels and change a whole look and set up.

Stop side trackin me, I am slowly on course and things like this is like doing a u-turn with an aircraft carrier.

muzzza · #12 (**permalink**) 04-15-2017, 05:25 PM

Just about ready to give away my custom "Pace" suspension arms

Arms owe me $2200.00 alone !!

6061 billet arms, push rods, rod ends, steering adapters, toe arms etc

ICCARS · #13 (**permalink**) 04-15-2017, 06:42 PM

PM sent Muzz,
might be a good alternative for my new GT40 suspensions. Interested mate.

Cheers

muzzza · #14 (**permalink**) 04-16-2017, 04:50 AM

Quote:

Originally Posted by muzzza

Just about ready to give away my custom "Pace" suspension arms

Arms owe me $2200.00 alone...........!!

6061 billet arms, push rods, rod ends, steering adapters, toe arms etc

Sold !

SydneyChris · #15 (**permalink**) 04-19-2017, 11:50 PM

springs still available.. whats the static height and load rates..?

muzzza · #16 (**permalink**) 04-20-2017, 01:13 AM

Quote:

Originally Posted by SydneyChris

springs still available.. whats the static height and load rates..?

Everything gone.....Muz

albanycobra · #17 (**permalink**) 04-22-2017, 04:33 AM

I have a similar spring collection if someone is looking for cheapies

Gav · #18 (**permalink**) 04-22-2017, 08:11 PM

Have you got any keeper springs Dave?
I started on the coupe yesterday assembling upper arms and coil overs and I will need some keeper springs to stop the main spring from bailing out if I am to get it to sit as low as I want to.

albanycobra · #19 (**permalink**) 04-23-2017, 12:23 AM

Sorry Gav no keepers...

Gav · #20 (**permalink**) 04-23-2017, 06:49 AM

You are not a keeper either then