Steering Wheel Cap

OLSCHL · #1 (**permalink**) 07-27-2004, 04:19 AM

Gday guys,

Was wondering if anyone has purchased any Steering wheel caps from Finish Line Inc? See i just bought a 6 bolt SAAS steering wheel boss and steering wheel and was wanting to replace the current cap i have on mine (current cap looks a disgrace

!) Would like to go for the AC CAP that finish line INC are selling. Just wanting to see if someone else had done the same and to see if it would fit. Im aware they are primary made for moto-lita steering wheel set ups.

Cheers

DonC · #2 (**permalink**) 07-27-2004, 06:12 AM

Give Finish Line a call and ask them if it'll fit.
DonC

BMK · #3 (**permalink**) 07-27-2004, 05:40 PM

OLSCHL

Enzo and Paula will respond overnight (everytime) to any email you send.

Their on the left in the advertisers column. The have a Mota Lita section on their site.

Airmail to you will be under a week from their premises. Just had a package in in under a week.

Cheers

Bernie

Leeroy · #4 (**permalink**) 07-27-2004, 08:40 PM

Check out Aussie Mikes gallery, he got a finishline AC badge & as always machined his own boss etc. Looks hot too.
Leeroy

Aussie Mike · #5 (**permalink**) 07-29-2004, 06:37 PM

OLSCHL, You've got mail.

Cheers

Dave Bermani · #6 (**permalink**) 07-29-2004, 07:03 PM

I have a Shell Valley and the cap that came with the steering wheel was a cheap (sorry, Shell Valley) chrome thing that didn't fit very well. So I had a machine shop turn an AL hub for me. I drilled and tapped the holes around the perimeter and used ss hex socket cap screws to attach to the wheel and base hub. I epoxied the Cobra emblem in the center. See my gallery for pix. It cost be about $30 total. Looks kinda classy.
Dave