Fuel Rail Adapters

simon clemens · #1 (**permalink**) 02-01-2005, 06:28 AM

I need any infomation as where to buy some bloody fuel rail conectors for my stock american "95" 5L windsor engine. (5/16" stock rail). I just cant seem to find them anywhere!!!
They are the type that needs the white plastic collar tool to spread the round spring open for disconection. Same conections are used on some A/C systems.
I've tried wreckers, enzed, pirtek, castlemaine rod shop, and a few others that have no idea what I'm on about!

PLEASE if you have had the same problem and know where I can buy these adapters... let me know before I rip the bloody engine out and replace it with a CHEV

Thanks if you can help!!!... Simmo

Flip · #2 (**permalink**) 02-01-2005, 04:56 PM

Simmo,
Have you tried Ford I believe they are used on EF V8.

Phil

sirelesar · #3 (**permalink**) 02-01-2005, 05:25 PM

I got mine in Summit. I have the 302 but it may be the same ones. They are in two sizes, one for the inlet and one for the outlet. They are anodized blue and look really good.Part Numbers:
RUS-640870
RUS-640880
You probably will need both.
Call them for your application.
Good Luck,
Darren

simon clemens · #4 (**permalink**) 02-02-2005, 06:06 AM

Thankyou Darren, I had a look at Summit Racing and the part numbers you gave me.
They are exactly what I was hunting for, thanks mate!
Hope a good deed comes your way soon...Simmo

Thanks to Phil too, I'm sure that the EL, EF V8's have a different set up as I couldnt find any at the wreckers with this type of fitting, thanks for your reply anyway.