Flames

ledge · #1 (**permalink**) 03-12-2005, 10:51 PM

This is probably a young hoon thing but they may look good commin out of the side pipes

http://www.flamethrowers.com.au/photos.htm

Paul

Hotfingrs · #2 (**permalink**) 03-13-2005, 03:10 AM

I always liked them, just didn't want to take the time to hook a system up. Not really that expensive to do, around a couple hundred dollars.

750hp · #3 (**permalink**) 03-13-2005, 03:17 AM

Just tune your computer to throw in heaps of fuel injector pulse width at maximum vacuum (lifting off from high revs) ala V8 Supercars, and you'll have all the flames you know what to do with !

That, or just fit the headers with sealant or gaskets, to allow an exhaust leak. Instant flames when you back off. I have a couple of pinholes in my Fairmont's exhaust (high up on the primary pipes where the porcelain coating has failed). Get some revs up, then back off, and there's a flash of light out the back that always scares me into thinking a speed camera has got me....

PCC · #4 (**permalink**) 03-13-2005, 04:41 AM

Or simple add on a dodgy airflow meter - as I well know!!!!